|Minimum Order Quantity||1 Piece|
|Enclosure Type||Flameproof IIA,IIB|
|Power Supply||24 VDC|
Description of vortex flowmeter
vortex flowmeters, flow meters to measure the volume of gas, vapor or liquid volume flow, volumetric flow or standard conditions of mass flow rate based on Carmen (Karman) vortex principle. And as a flow transmitter used in automated control systems Vortex.
Parameters of vortex flowmeter :
Nominal by (mm): 15,20,25,40,50,65,80,100,125,150,200,250,300
Instrument Material: 1Cr18Ni9Ti
Nominal pressure (Mpa): PN1.6Mpa; PN2.5Mpa; PN4.0Mpa
Measured medium temperature (°C): -40 ~ +250 °C; -40 ~ +350 °C
Temperature -10 ~ +55 °C, relative humidity 5% to 90%, atmospheric pressure 86 ~ 106Kpa
± 0.5 Indication: the measurement of liquid
Measurement of gases or vapors:
Showing the value of ± 1.0, ± 1.5
Turndown ratio: 1:10; 1:15
Pressure loss coefficient: Cd <2.6
Output signal: optional 4-20mA or pulse
Sensor: +12 VDC, +24 VDC (optional)
Transmitter: +24 VDC
Field display type: 3.2V lithium battery meter comes
Signal transmission lines: STVPV3 × 0.3 (three-wire), 2 × 0.3 (two-wire)
Mounting: flange clamping flange connection or integration
Transmission distance: ≤ 500m
Signal line interface: internal thread M20 × 1.5
Explosion levels: ExdIIBT6
Allow vibration acceleration: 1.0g
Features of vortex flowmeter :
No moving parts, long-term stability, simple structure for easy installation and maintenance
Using interference cancellation circuit and anti-vibration sensor head, has certain anti-vibration performance environment
Ultra-low-power single-chip microcomputer technology, Section 1 3.2V10AH lithium batteries can be used for more than 5 years
Software for instrument coefficient nonlinear correction to improve measurement accuracy
Pressure loss, wide range
Cumulative traffic using EEPROM brownout protection, the protection of longer than 10 years
|Working Temperature||-20 - 50 degree C|
|Enclosure protection class||IP68|
|Power supply||3.6V lithium battery|
|Flow velocity range||0-15 m/s|
Battery-powered electromagnetic water meter, MAG 8000 DN 25 to DN 1200 (1''to 48''). Designed for the water industry, the MAG 8000 program is a battery-powered solution that makes it easier than ever to install a reliable water meter virtually anywhere.
Drinking water approvals.
MI 001 EU Approval.
OIML R49 type approval.
Battery lifetime up to 6+ years.
Mains powered 24 V AC/DC, 115 V AC/ 230 V AC with battery backup.
IP68 (NEMA 6P) enclosure for sensor and transmitter in compact or remote version.
|Power supply||100 - 240VAC|
SI Trans F M DN 2 to DN 2000 (1/12" to 78").
Full transmitter program MAG 5000/ MAG 6000/MAG 6000 I Ex compact or remote mounting.
Variety of inputs and outputs and bus communication modules; PROFIBUS PA/DP, FOUNDATION Field-bus, HART and Mod bus RTU.
MAG 1100/1100 HT sensor for general process industries.
MAG 1100 F sensor for food and beverage and pharmaceutical industries.
MAG 3100/MAG 3100 HT sensor for general process industry.
MAG 3100 P designed for process industry and the harsh requirements in the chemical industry.
MAG 5100 W sensor designed for water and waste water applications.
*Your information is safe with us.